Rear Door Lamps and Switches

Rear Door Lamps and Switches

Left/Right Rear Window Switch

Observe notes on contact corrosion. Refer to => [ Contact Corrosion ] Service Precautions.

Removing





- Switch off ignition and remove ignition key.

- Remove rear door trim.

- Detach insulating mat from door trim.

- Remove bolts - arrows - and detach armrest.

- Remove bolt - arrow - and detach switch mount - 1 - from armrest.





- Remove bolts - arrows - and detach switch mount with window regulator switch.





- Disconnect electrical connector - 2 -.





- Carefully release catches - arrows - using a small screwdriver.

- Remove left rear window switch (In LR Door) (E52)/ (E54) - item 1 - downward out of switch mount.

Installing

Install in reverse order of removal, observing the following:

- Press switch into switch mount until fasteners engage.

- Install rear door trim.