Access/Start Authorization Antenna (In Rear Bumper) R136, Removing and Installing

Access/Start Authorization Antenna (in Rear Bumper) R136, Removing And Installing







Removing

- Remove rear bumper cover.
- Disconnect connector - 2 -.
- Remove screws - arrows -.
- Remove Access/Start Authorization Antenna (in rear bumper) R136 - 1 - from bumper cover.

Installing

Install in reverse order of removal, observing the following:
- Install rear bumper cover.

Tightening torque
Access/Start Authorization Antenna (in rear bumper) R136 to rear bumper cover: 2.5 Nm