Inclination/Anti-Theft Control Module

Inclination/Anti-Theft Control Module

• Component location: Under the right rear seat.

Removing

- If the control module was replaced, select the "Replace" function for the respective control module in "Guided Fault Finding" or " Guided Functions".

- Switch off ignition and remove ignition key.

- Remove rear seat bench or right individual seat.

- Remove nuts - arrows - and remove Inclination-/Anti-Theft Control Module (J529) - item 2 -.





- Disconnect electrical connector - 1 -.

Installing

Install in reverse order of removal, observing the following:

- Install rear seat bench or right individual seat.