Lower B-Pillar Trim

Trim

Lower B-Pillar Trim





1 - Clips (Qty. 2)

2 - Lower B-pillar trim

• Removing

- Unclip lower A-pillar trim in area of the B-pillar.

- Unclip wheel housing trim in area of B-pillar.

- Remove bolts - 3 - (Qty. 2).

- Unclip lower B-pillar trim - 2 - at clips - 1 - (Qty. 2) and pull trim forward.

- Pull lower B-pillar trim - 2 - upward and loosen air channel - 4 - while doing so.

- Disconnect harness connector for ventilation light - 5 -.

• Installing

• Ensure that the belt webbing is not jammed when installing trim.

- Connect harness connector for ventilation light - 5 -.

- Guide air channel - 4 - into hole on shell construction sill.

- Press on lower B-pillar trim - 2 -.

- Install bolts - 3 - (Qty. 2).

- Clip in lower A-pillar trim and wheelhousing trim.

CAUTION!
Ensure trim is held securely.

- Make sure that door rubber is pulled cleanly over upper B-pillar trim - 2 -.

3 - Screws, (Qty. 2)

4 - Air duct

5 - Harness connector for ventilation light.