Cooler LED Indicator

Cooler LED Indicator

Removing

• Install all cable ties that were loosened or cut off during removal in the same positions.

- Remove cooler => [ Cooler ] Cooler.

- Pull off thermostat rotary handle - 1 -.





• Use universal pliers if it is difficult to pull off the rotary handle.

• Wrap ends of pliers to prevent damage to rotary handle.

- Remove nut -1- and bolts - arrows -.





- Remove panel - 2 - with cooler lid.

- Disconnect the electrical connectors -1 through 4-.





- Carefully press securing lever - 2 - to the side and press light emitting diode - 1 - for operation indicator out of panel to the rear - arrow -.





Installing

Installation is reverse of removal, noting the following:

• All cable ties should be re-installed in same positions.

Tightening torque:s