Relay and Fuse Carrier behind Left Instrument Panel

Relay and Fuse Carrier behind Left Instrument Panel

Removing





- With ignition switched off, disconnect battery Ground (GND) wire. Refer to=> [ Battery, Disconnecting and Connecting ] Battery.

- Remove driver's storage compartment.

- Remove screws - 2 -.

- Disengage retaining pin - 3 - of relay and fuse carrier at side guide - arrow -.

- Remove relay and fuse carrier - 1 -.

If necessary, proceed with work steps.

- Unclip fuse boxes.

- Unplug connectors.

- Disconnect relays and unclip respective relay carrier.

• The precise assignment of relay and fuse carrier behind left instrument panel can be found in the applicable wiring diagram.

Installing





Install in reverse order of removal, observing the following:

- Engage retaining pin - 3 - of relay and fuse carrier at side guide - arrow -.

- Install driver's storage compartment.

- Connect battery. Refer to=> [ Battery ] Battery.