Right Luggage Compartment Relay and Fuse Carrier

Right Luggage Compartment Relay and Fuse Carrier

Removing





- With ignition switched off, disconnect battery Ground (GND) wire. Refer to=> [ Battery, Disconnecting and Connecting ] Battery.

- Remove ground stud - 3 - and nut - 2 -.

- Detach Energy Management Control Module (J644).

- Unplug connectors - 1 -.

- Release Comfort System Central Control Module (J393) - arrows - and detach it from relay and fuse box.





• Electrical connectors remain connected.

- Open the cover - 1 -.





- Remove wires - 2 through 6 -.

- Remove nuts - arrows - and detach relay and fuse box.

- Unclip fuse boxes at relay and fuse box.

- Detach relays and control modules and then unclip appropriate relay carrier.

• For exact assignment of relay and fuse carrier in right luggage compartment, refer to current wiring diagram.

Installing

Install in reverse order of removal, observing the following:

- Install Energy Management Control Module (J644) => [ Energy Management Control Module ] Service and Repair, observing installation sequence.