Hood Seal Assembly Overview, From MY 2006

Hood Seal Assembly Overview, from MY 2006





1 Gasket for lock carrier

• Apply gasket at left and right on foam piece.

• When doing this, make sure it is applied without gaps.

• Compress excess length of gasket along lock carrier.

2 Left sealing profile

• Self-adhering, adhesion surfaces must be free of dust and grease.

3 Gasket for plenum chamber

• Apply gasket at left and right on foam piece.

• When doing this, make sure it is applied without gaps.

• Compress excess length of gasket along front panel of plenum chamber.