Glove Compartment

Glove Compartment

Special tools, testers and auxiliary items required

• Special hook (3370)





• Torque Wrench (V.A.G 1410)









1 Glove Compartment

• Removal:

- Disconnect instrument panel cover - 2 -. Refer to => [ Removing Right Instrument Panel Cover ] Right Instrument Panel Cover

- Open glove compartment cover.

- Remove three bolts - 3 - at top in depressions of glove compartment - 1 -.

- Remove outside bolts - 5 - (Qty. 2) from the side.

- Remove bolts - 4 -- (Qty. 2) from the footwell out from below.

- Remove glove compartment downward.

- Remove connector - 6 - of glove compartment illumination.

- Disconnect harness connectors to electrical components in glove compartment, if available.

• Installing:

To install, perform the steps used in removal in reverse order.

2 Instrument Panel Cover

• Removing, refer to => [ Removing Right Instrument Panel Cover ] Right Instrument Panel Cover

3 Bolts (Qty. 3)

• Tightening specification 5 Nm

4 Screws, (Qty. 2)

• Tightening specification 5 Nm

5 Screws, (Qty. 2)

• Tightening specification 5 Nm

6 Electrical Connection

7 Instrument Panel

Removing Right Instrument Panel Cover





- Pull off right instrument panel cover - arrow - using special hook (3370).