Seat Cover From Padding, Separating

Seat Cover From Padding, Separating







1 - Seat cover

- Removing
- Remove seat cover with padding.
- Lift seat cover fabric - 1 - and cut through staples - 3 - (View A).

- Installing
- Use upholstery stapler V.A.G 1634/to install new staples.
- To facilitate assembly, push back longitudinal rods as far as first transverse rod.
- When installing, staple transverse rods first, then longitudinal rods.

2 - Connector
- For heated seat to connector console
3 - Staples
4 - Padding
5 - Side cushion heating
- Removing and installing side cushion heating on vehicles with glued heating element.
6 - Seat heating
- Removing and installing seat heating on vehicles with glued heating element.