Erase DTC Memory (Scan Tool Function 05)

Diagnostic Trouble Code (DTC) Memory, Erasing (Function 05)

NOTE: DTC memory cannot be erased, check DTC memory again and repair any malfunctions.

Test requirements
- DTC memory checked Check DTC Memory (Scan Tool Function 02)
- All malfunctions repaired

After successfully checking DTC memory:

Indicated on display:

Rapid data transfer HELP
Select function XX

- Press buttons -0- and -5- to select "Erase DTC Memory" function 05.

Indicated on display:

Rapid data transfer Q
05 - Erase DTC Memory

- Press -Q- button to confirm input.

Indicated on display:

Rapid data transfer "
DTC Memory is erased

DTC memory is erased.

- Press -> button.

Indicated on display:

Rapid data transfer HELP
Select function XX

NOTE:
- If this display appears as shown, the test sequence was incorrect.
- If this display appears as shown, the test sequence was incorrect.

Follow the sequence of operations precisely, first read DTC memory, repair any malfunctions (if necessary) then erase DTC memory.