Tank Flap, Removing and Installing

Tank Flap, Removing And Installing

Special tools and equipment







- 3370 special tool

Removing







- Remove three bolts designated with arrows.
- Remove tank flap vertically from chassis cut-out using special tool 3370.







- Remove bolts (arrows) of release cable.

Installing
Installation is the reverse of removal, noting the following:
- In order to route overflow hose without kinks, rubber cup must be installed as follows:
- The edge of the overflow hole must be flush with the edge of the square hole as depicted (arrows).

Tightening torques

Components Nm
Tank flap to body 4 Nm