Headlight Range Control Module -J431-, Removing and Installing

Headlight Range Control Module -J431- - Coupe, Removing And Installing

Removing

CAUTION:
Before beginning repairs on the electrical system:
- Switch off all electrical consumers.
- Switch ignition off and remove ignition key.

- Remove rear seat bench.







- Release clips -arrows-.
- Remove module -2- from bracket -3-.
- Disconnect electrical connection -1-.

Installing
Install in reverse order of removal, noting the following:

OBD function - "Basic setting" must be performed on -J431- when replacing
See VAS 5051/5052 in operating mode "Guided Fault Finding".