ABS/EDL and ABS/EDL/ASR ITT Mark 20 IE

Notes: Work to be carried out after completing repairs, Refer to Brakes and Traction Control, Service Precautions.

1. Hexagon socket head bolt, 8 Nm
2. ABS speed sensor
^ Before inserting sensor, clean fitting hole inner surface and coat with lubricating paste G 000 650
3. Stub axle
4. Splash plate
5. Wheel hub with wheel bearing and rotor
^ Only replace complete
^ Removing and installing:
6. Self - locking 12 - point nut, 175 Nm
7. Cap
^ Pressing off and driving in
8. Brake disc
9. Phillips - head screw
10. Hexagon bolt, Tighten to 60 Nm
^ With dished spring
11. Axle beam