Engine and Transmission, Separating

Engine and transmission, separating

Special tools and equipment required





^ Workshop crane VAS 6100





^ Bracket T10013
^ Bolt M8 x 40 with nut and 30 mm diameter washer

Work sequence

^ Engine/transmission assembly removed and attached to engine bracket T10102





- Remove bolts -1- and -2- at bracket for bevel box and remove bracket.





- Disconnect coolant hose at ATF cooler (arrow).





- Remove circlip and remove pin from bracket T10013.
- Secure bracket T10013 with bolt M8 x 40 and 30 mm diameter washer to transmission lifting eye.
- Attach workshop crane VAS 6100 to bracket T10013.





- Remove bolts -1... 10- on engine/transmission flange.
- Separate transmission from engine.