Diagnostic Trouble Code (DTC) Memory, Erasing (Function 05)

Diagnostic Trouble Code (DTC) Memory, Erasing (Function 05)

NOTE:
- DTC memory cannot be erased, Check DTC Memory again and repair malfunction.
- DTCs are not updated after erasing DTC memory until after ignition has been switched on and off.

Requirements
- DTC memory checked Diagnostic Trouble Code (DTC) Memory, Checking (Function 02)
- All malfunctions repaired.

Procedure
After successful DTC memory check:







Display on VAS 5051/5052:
- In selection -1-, click on the diagnostic function "05 - Check DTC Memory".







Display on VAS 5051/5052:
1 - no indication (before erasing)
or
- DTC memory erased

NOTE: If indication -1- appears in display field: "DTC memory has not yet been checked", the work sequence was not adhered to correctly. DTC memory can only be erased if DTC memory was checked before.

2 - Press on "OK"-button in display -2-.
- End function "05 - Erase DTC Memory" by pressing on < - button.

NOTE:
- Perform the function 05
- Data is being erased