Convertible Top, Adjusting

Convertible Top, Adjusting

Lengthwise







- First determine how far convertible top must be shifted at end plate - 1 -.
- Striker pin on convertible top must align with center of hole (arrow A).







- To adjust convertible top lengthwise, loosen hex bolts - 1 - at left and right on main bearing - 2 -.







- Shift main bearing - 1 - of convertible top by the previously determined amount using markings (arrow) on chassis - 2 -.
- Striker pin on front of convertible top must align with center of hole on end plate.
- Tighten hex bolts on main bearing to 20 Nm.

Height adjustment
- Remove roof frame trim







- To adjust height of convertible top at front, shift height of end plate.
- Markings (arrows) have been applied for more precise height adjustment.