Convertible Top, Installing

Convertible Top, Installing

- Remove tensioning strut from main bearing.
- Lift convertible top over storage compartment and guide tensioning strut into storage compartment on one side.
- Place convertible top down in storage compartment diagonally toward front.
- Secure tensioning strut to main bearing and tighten bolts to 8 Nm.
- Insert convertible top and tighten hex bolts at main bearing to 20 Nm.
- Reattach trim for convertible top storage compartment at rear tensioning strut
- Reconnect electrical connections.
- Perform function test.
- Install various trim pieces.