Commercially Available Tools and Materials
Commercially Available Tools And Materials
Designation
Fin comb
Charging hoses 5/8 inch - 18 UNF with valve opener
Connection piece for refrigerant cylinder and seal with quick-release coupling connection or threaded connection 5/8 inch - 18 UNF
Valve caps 5/8 inch-18 UNF
Pressure gauge set with pressure reducer for nitrogen
Quick-release coupling adapter for service connections, 2x included in scope of delivery of A/C service station
Open-ring wrench, size according to threaded joints at refrigerant pipes
Valve opener for charging hoses
Connecting nipple for conical seal 5/8"-18 UNF
Compressed-air gun with rubber end piece
Valve opener for Schrader valve
Hand shut-off valve 5/8 inch-18 UNF
Recycling container for refrigerant R134a
Digital thermometer
Protective gloves
Safety goggles
Refrigerant R134a with cylinder (capacity as required)
Fin comb
Charging hoses
5/8 inch-18 UNF thread
NOTE:
- Use differently colored charging hoses (1800 mm long).
- Have valve opener and spare seals to hand.
- A charging hose in short version is also included in adapter case for VW/Audi passenger cars VAS 6338/1.
Connection piece for refrigerant cylinder with seal, quick-release coupling connection or threaded connection 5/8 inch - 18 UNF
Valve caps with spare seals (for 5/8"-18 UNF thread)
Seals can also be used for charging hoses.
NOTE: Valve caps with spare seals are also included in adapter case for VW/Audi passenger cars VAS 6338/1.
Pressure gauge set with pressure reducer for nitrogen (max. reducing pressure: 15 bar)
1. Pressure gauge set
2. Pressure hose (ID 5 mm, length 2 m)
3. Nitrogen
4. Hose fitting
NOTE: For connection to adapter set V.A.G 1785 with 5/8"-18 UNF thread
Quick-release coupling adapter for service connections
- High-pressure side, nominal size 16 mm
- Low-pressure side, nominal size 13 mm
- 2x release tool (Sharan)
NOTE: This quick-release coupling is included in the scope of delivery of the A/C service station.