Courtesy Lamp: Service and Repair

Front Interior/Reading Light - Roadster, Removing And Installing

CAUTION:
Before beginning repairs on the electrical system:
- Switch off all electrical consumers.
- Switch ignition off and remove ignition key.

Special tools and equipment required







- Lever 80-200

Removing
- Press switch at interior/reading light to position -O-.







- Use lever 80-200 to carefully pry rear edge of interior light out of windshield frame -arrow-.

CAUTION: Use care not to damage retainer tabs on removal.

- Disconnect electrical connection.

Installing
Install in reverse order of removal, noting the following:
- Start by inserting connector end of interior light in windshield frame.
- Press interior light into windshield frame until it engages.