General Information

General information

General notes
For safety reasons, tires should not be replaced individually, instead replace tires by axle (at least).

The tires with deeper tread should always be installed on the front wheels.

The factory recommends using tires of the same make, design and tread pattern on all wheels.

Always replace the rubber valve when installing a new wheel rim or tire.

Tires must be installed with the DOT marking facing outwards (in the case of tires with a directional tread pattern, this only applies to the left-hand side of the vehicle).

If the vehicle is installed with tires with a directional tread pattern, the spare wheel should have a wheel/tire combination for the right-hand side of the vehicle.

Always clean contact surfaces between rims and brake disc.

Special tools, testers and auxiliary items required





^ Wheel key lock set T40004