Clutch Pedal Switch F36 Removing and Installing (Round Housing)

Clutch pedal switch F36 removing and installing (round housing), 02M/02Y, 5 & 6 Speed M/T, AWD

Note: In order to assure secure fitting, clutch pedal switch must not be installed more than once.

Removing
- Remove driver side storage compartment.
- Disconnect electrical harness connector at clutch pedal switch.
- Remove clutch pedal switch by rotating 45° toward left.





Installing
Installation is performed in reverse order of removal. Note the following:
- Before installing clutch pedal switch, remove plunger - arrow - completely.
^ Clutch pedal must be in rest position (not operated).
- Guide clutch pedal switch through assembly opening, while doing so, press plunger against the clutch pedal and secure switch by rotating 45° toward right.
- Install driver side storage compartment.