Procedures

Wiper Blade Park Position, Setting

- Briefly operate wiper motor and allow it to return to park position.







- Check if wiper blades rest against marking -1- on windshield
- Check dimensions -a- and -b-.

Specifications:
- a = 25 + 5 mm
- b = 35 + 5 mm

NOTE: Dimensions given here are the minimum distances between the ends of the wiper blades and the plenum cover at the bottom edge of the windshield.

If specifications not met
- Remove wiper arms.
- Align wiper arms to meet specification and tighten nuts to 16 Nm.

Tightening torque

Wiper arm to wiper shaft 16 Nm