Interior Moulding / Trim: Service and Repair

Footwell Vent And Footwell Vent Trim, Removing And Installing







1 - Right-hand footwell vent trim

- Removing
- Pry out screw caps - 7 -.
- Remove screws - 8 - (2x).
- Pull out footwell vent trim - 1 - to rear.

- Installing
- Make sure retaining hook - 5 - engages in instrument panel.
- Engage right-hand footwell vent trim - 1 - and left-hand footwell vent trim - 3 - in center.

2 - Footwell vent

- Removing
- Trims of right-hand and left-hand footwell vents (- 1 - and - 3 - respectively) removed.
- Pull out footwell vent - 2 - in direction of - arrow -.

- Installing
- Press on footwell vent - 2 - until it engages.

3 - Left-hand footwell vent trim

- Removing
- Pry out trim cap - 5 -.
- Remove screws - 4 - (2x).

- Installing
- Engage trims of right-hand and left-hand footwell vents (- 1 - and - 3 - respectively) in center.

4 - Screws (2x)
- Tightening torque 3.5 Nm
5 - Trim cap
6 - Retainer hooks
7 - Trim caps (2x)
8 - Screws (2x)
- Tightening torque 3.5 Nm