Erase DTC Memory (Scan Tool Function 05)

Erase DTC Memory (Function 05)

NOTE:
- At the same time DTC memory is erased, resetting of the function status register takes place
- If DTC memory cannot be erased, check DTC memory again and repair malfunction.

Requirements
- DTC memory checked. Check DTC Memory (Scan Tool Function 02)
- All malfunctions repaired.

After successful DTC memory check:

Indicated on display:

Rapid data transfer HELP
Select function XX

- Press buttons -0- and -5-. This selects "Erase DTC Memory", function 05.

Indicated on display:

Rapid data transfer Q
05 - Erase DTC Memory

- Press -Q- button to confirm input.

Indicated on display:

Rapid data transfer ->
DTC Memory is erased!

DTC memory is erased.

- Press -> button.

Indicated on display:

Rapid data transfer HELP
Select function XX

NOTE:
- Test sequence is malfunctioning if this message is displayed.
- Test sequence is malfunctioning if this message is displayed.

Follow test sequence exactly: first check DTC memory, repair malfunction(s) if necessary, then erase.