Diagram 116/19 (Tracks 239-252)

IMPORTANT NOTE:
This manufacturer uses "Track" style wiring diagrams.
For information on how to use these diagrams effectively, please refer to Diagram Information and Instructions. How to Read Track Diagrams


Oil Pressure Switch, Oil Level Thermal Sensor





ws = white
sw = black
ro = red
br = brown
gn = green
bl = blue
gr = grey
li = lilac
ge = yellow
or = orange
rs = pink

F1 - Oil Pressure Switch Locations

G1 - Fuel Gauge

G3 - Engine Coolant Temperature (ECT) Gauge

G169 - Fuel Level Sensor 2 Fuel Pump and Sensors

G266 - Oil Level Thermal Sensor Locations

J285 - Instrument Cluster Control Module Control Modules in Interior Of Vehicle

K3 - Oil Pressure Warning Lamp

K16 - Fuel Reserve Warning Lamp

K28 - Engine Coolant Level/Temperature (ECL/ECT) Warning Lamp

T6 - 6-Pin Connector, black, near left front long member

T14 - 14-Pin Connector, black, near left front long member

T32 - 32-Pin Connector, blue (Connector A)

(366) - Ground Connection 1 (in main wiring harness)

(401) - Sensor Ground Connection (in interior wiring harness)

(655) - Ground Connection (on left headlamp) Overview Of Ground Connections in Front Part Of Vehicle

(B281) - Plus Connection 5 (15a) (in main wiring harness)

* - Only models with all-wheel drive

*** - Only models with extended service intervals

# - Not applicable, phased-in modification

## - Phased-in modification

Previous Diagram 116/18 (Tracks 225-238)