Rear Door Lamps and Switches

Door Warning Lamp and Rear Entry Lamp

Removing






- Press retaining tab - 1 - in with a flat-head screwdriver and pry out door warning lamp or entry lamp - 2 -.

- Disconnect electrical connector - 3 -.

- If equipped, carefully pry off the door warning lamp cover to replace the bulb - arrow -.






- Remove bulb - 1 - (12V, 5 W) on back of door warning lamp/entry lamp from socket - 2 -.






Installing

Install in reverse order of removal, noting the following:

- Install the cover to the door warning lamp, if equipped.

- Connect electrical connector.

- Insert the door warning lamp or entry lamp into the opening and engage it on the opposite side.