Throttle Valve Control Module

Throttle Valve Control Module

Removing

- Remove engine cover. Refer to => [ Engine Cover with Air Filter Element ] Service and Repair.

- Remove the noise insulation.

- Loosen bolts and clamps - arrows - and remove charge air pipe and hose downward.





- Remove four bolts on throttle valve control module (J338) and remove it.

Installing

- Installation is performed in reverse order.

- After the replacing the throttle valve control module, it must be adapted to the engine control module (J623) (basic setting, display group 60) see vehicle diagnosis and service system (VAS 5052) guided functions.