Tire Pressure Warning Reset Switch: Service and Repair

Tire Pressure Monitoring Display Switch, Removing And Installing

Special tools, testers and auxiliary items required







- Hook 3370

Removing. vehicles with 1 DIN radio:

CAUTION:
- Switch off all electrical consumers.
- Switch ignition off and remove ignition key.

- Remove radio.







- Unclip trim for switch panel at bottom -arrows 1 -.
- Unclip trim for switch panel at top using Hook 3370 -arrow 2 -.
- Remove trim for switch panel.







Removing. vehicles with 2 DIN radio:
- Unclip trim for switch panel at bottom -arrow 1 -.
- Unclip trim for switch panel at side using Hook 3370 -arrow 2 -.
- Remove trim for switch panel.







All models:
- Carefully remove tire pressure monitoring display switch from switch mounting using Hook 3370 -arrow-.
- Disconnect electrical connection.

Installing
Install in reverse order of removal, noting the following:
- Reconnect electrical connection.
- Push switch into mounting in instrument panel and ensure it is properly engaged.
- Install radio.