Controls, Housing

Special Tools

Special tools, testers and auxiliary items required

• Driving Sleeve (VW 244B)

• Transmission Support (VW 353)

• Pressure Plate (VW 401)

• Pressure Plate (VW 402)

• Punch (VW 407)

• Sleeve (VW 416 B)

Special tools, testers and auxiliary items required

• Guide Pin (VW 436A)

• Guide Pin (VW 439)

• Slide Hammer (VW 771)

• Holding Plate (VW 801)

• Guide Pin (10-15)

• Thrust Piece (3124)

Special tools, testers and auxiliary items required

• Driver (3264)

• Alignment Fixture (3290)

• Torque Wrench (V.A.G 1331)

• Drift (T10168)

• Thrust Piece (T10203)

• Drift (T10169)

Special tools, testers and auxiliary items required

• Adapter (VW 771/40)

• Engine Support Bridge (10-222A)

• Engine Support Feet (10 - 222 A /1)

• Hook (10 - 222 A /10)

• Engine/Transmission Jack (V.A.G 1383 A)

Special tools, testers and auxiliary items required

• Step Ladder (VAS 5085)

• Transmission Support (3282)

• Adjustment Plate (3282/33)

• Pin (3282/29)

• Base Block (3282/52)

• Security Mount (3282/59)

• Torque Wrench (V.A.G 1331)

• Torque Wrench (V.A.G 1332)

Special tools, testers and auxiliary items required

• Holding Plate (VW 309)

• Holding Fixture (VW 313)

• Transmission Support (VW 353)

• Pressing Sleeve (VW 455)

• Slide Hammer (VW 771)

• - 1 - Internal Puller (Kukko 21/01)

• - 3 - Separating Tool (Kukko 17/0)

• - 4 - Counter-Support (Kukko 22/1)

Special tools, testers and auxiliary items required

• Bracket (30-211A)

• Thrust Piece (T10042)

• Thrust Piece (T40008)

• Torque Wrench (V.A.G 1331)

• Heat Gun (V.A.G 1416)

• Drift (T10169)

Special tools, testers and auxiliary items required

• Holding Plate (VW 309)

• Holding Fixture (VW 313)

• Transmission Support (VW 353)

Special tools, testers and auxiliary items required

• Additional Hooks (10 - 222 A /2)

• Workshop Crane (VAS 6100)

• Lifting tackle (T40013)

Special tools, testers and auxiliary items required

• Pressure Plate (VW 402)

• Punch (VW 411)

• Sleeve (VW 426)

• Thrust Piece (VW 431)

• - 1 - Internal Puller 18.5 to 23.5 mm (Kukko 21/3)

• - 4 - Counter-Support (Kukko 22/1)

Special tools, testers and auxiliary items required

• Connecting Pin (T10027A)