Bumper Cover Trim

Bumper Cover Trim

Removing

- Remove the rear bumper cover. Refer to => [ Rear Bumper Cover ] Rear Bumper Cover.

- Open the retaining clips - 1 - along the entire length and remove the trim panel - 2 - for the bumper cover from the bumper cover - 3 - - arrow -.






Installing

• For the correct tightening specification => [ Rear Bumper Cover, Parking Aid Sensor ] Rear Bumper Cover Overview.

Installation is reverse of removal, but note the following:

- The trim for the bumper cover must be pressed into place on the bumper cover until you can hear it click into place.

- Install the rear bumper cover. Refer to => [ Rear Bumper Cover ] Rear Bumper Cover.