Sill Panels

Sill Panels

• Heat sill panel using hot air gun before removing.

• Clean adhesion surface with mineral spirits, treat with silicone remover and rub dry.

• Heat sill panel to approx. 40 °C (104 °F) using hot air gun before installing.

• Pull off protective foil and press sill panel on forcefully.






1 - Front Sill Panel

2 - Rear Sill Panel

3 - Front Gap Cover for Sidemember

4 - Double Sided Adhesive Tape

• Pull protective foil from double-sided adhesive tape - 4 - before installation.

5 - Rear/Front Gap Cover for Sidemember