Sill Side Trim

Sill Side Trim

Removing





- Remove backrest adjustment wheel. Refer to => [ Backrest Adjusting Wheel ] Backrest Adjusting Wheel.

- Remove seat height adjustment handle. Refer to => [ Seat Height Adjustment Handle ] Seat Height Adjustment Handle.

- Open the storage compartment - 1 -.

- Push the stop for the opening - 3 - to the side and move the storage compartment all the way down.

- Disconnect the storage compartment pivot, while doing this, carefully push the bracket - 2 - slightly to the side - arrow A -.

- Pull the storage compartment forward and out - arrow B -.

- Remove the bolts - 2 - and - 3 - on the side trim on the door sill side.





• Ignore - item 1 - and the - arrows -.

- Remove the backrest cover - 1 - on the trim - 2 -- arrow -.





- Remove expanding clip - 1 -, press clamping pin through to the inside.





- Open the clips - 3 -- arrow A -.

- Remove the trim - 2 -- arrows B -.

- If applicable, disconnect the lumbar support electrical connector.

Installation

To install, perform the steps used in removal in reverse order.

Tightening specifications, refer to => [ Seat Adjustment Trim Component Overview ] Seat Adjustment Trim Component Overview.