Fuel Level Sensor 2, Connector Assignment

Fuel Level Sensor 2, Connector Assignment

Procedure






The fuel level sensor 2 (G169) is at the left under the rear seat bench.

- Remove rear seat bench.

- Unclip left locking flange cover retaining tabs - arrows -.

- Carefully release and disconnect the connector - 1 - on the connector flange.






• Disregard item - 2 -.

Terminal assignment of the 3-pin harness connector at fuel level sensor 2 - vehicles through approximately 11.04






1. Wire connection from fuel level sensor to instrument cluster (fuel gauge)

2. Fuel level sensor 2 ground (sensor ground)

3. Not used


Terminal assignment of the 3-pin harness connector at fuel level sensor 2 - vehicles from approximately 11.04






1. Fuel level sensor 2 ground (sensor ground)

2. Wire connection from fuel level sensor to instrument cluster (fuel gauge)

3. Tank sensor total resistance