Diagram 111/14 (Tracks 169-182)

IMPORTANT NOTE:
This manufacturer uses "Track" style wiring diagrams.
For information on how to use these diagrams effectively, please refer to Diagram Information and Instructions. How to Read Track Diagrams


Throttle Valve Control Module, Engine Coolant Temperature (ECT) Sensor, Knock Sensors (KS)





ws = white
sw = black
ro = red
br = brown
gn = green
bl = blue
gr = grey
li = lilac
ge = yellow
or = orange
rs = pink

G61 - Knock Sensor (KS) 1 Locations

G62 - Engine Coolant Temperature (ECT) Sensor Locations

G66 - Knock Sensor (KS) 2 Locations

G186 - Throttle Drive (for Electronic Power Control (EPC)

G187 - Throttle Drive Angle Sensor 1 (for Electronic Power Control (EPC)

G188 - Throttle Drive Angle Sensor 2 (for Electronic Power Control (EPC)

J220 - Motronic Engine Control Module (ECM) Control Modules in Front Part Of Vehicle

J338 - Throttle Valve Control Module Locations

T2f - Double Connector, black, in left engine compartment (knock sensor 2)

T3 - 3-Pin Connector, red, in left engine compartment (knock sensor)

T6d - 6-Pin Connector, black, near throttle valve control module

T121 - 121-Pin Connector, black, on engine control module (ECM)

(220) - Sensor Ground Connection (in engine wiring harness)

(D103) - Connection 3 (in engine compartment wiring harness)

Previous Diagram 111/13 (Tracks 155-168)

Next Diagram 111/15 (Tracks 183-196)