Exhaust System, Installing

Exhaust System, Installing

• Align exhaust system when cold.

- Loosen clamping sleeve bolts item - 18 - => [ Clamping Sleeve ] Exhaust System Component Overview.





- Press rear part of exhaust system forward - arrow - until tension at retaining loop item - 2 - => [ Retaining Loop ] Exhaust System Component Overview between center and rear mufflers is - a - = 13 to 17 mm.

- Install clamping sleeve horizontally.





• Threaded connection points toward the right.

- Tighten clamping sleeve threaded connections evenly to 40 Nm.

End Pipes, Aligning





- Align rear muffler so there is an even distance - a - and - b - between bumper cutout and tailpipes.

- To align tailpipes, loosen rear muffler mounting components if necessary.