Outer Tail Lamps

Outer Tail Lamps

Removing






- Switch off ignition and remove ignition key.

- Turn light switch to 0 position.

- Unclip plugs - 1 - from luggage compartment trim.

- Remove nut - 2 -.

- Remove the tail lamps from the inside - arrows -, while doing this, the tail lamps will come out of the clip nuts.

- Disconnect electrical harness connector at lamp carrier.

Installing

Install in reverse order of removal, noting the following:

- Install the tail lamps from the inside into the openings and press the clip nuts.

- Tighten cap nut.

- Insert plugs in luggage compartment trim.

Tightening Specifications