Clutch, Sachs

Clutch, Sachs
M6 13 Nm
M7 20 Nm
When installing, tighten bolts as follows so pressure plate does not distort (causing shuddering on acceleration):
- Screw in all 6 bolts evenly, by hand, until the bolt heads contact the pressure plate.
- Tighten all 6 bolts clockwise, one after the other and in steps of 90° (1/4 turn) until the housing contacts the flywheel.
- Tighten all 6 bolts clockwise, one after the other to tightening specification.