Cover and Padding For Head Restraint With Slide-In Locking Mechanism, Removing and Installing

Cover And Padding For Head Restraint With Slide-In Locking Mechanism, Removing And Installing







- Remove head restraint with slide-in locking mechanism.
- Using a screwdriver, pry out securing strips - 3 - (4x).
- Detach knob - 2 -.
- Detach cover and padding - 1 -.







- Remove padding - 2 - from cover - 3 -.

- Installing:
- Insert padding - 2 - correctly into cover - 3 -.
- Insert head restraint mount - 1 - into padding with cover.
- Press fastening strips firmly into guide channel (pull to check).