Seat Height Adjustment Handle

Seat Height Adjustment Handle





1 Seat Height Adjustment Handle

- Create an assisting tool. Refer to => [ Preparing assist tool to remove seat height adjusting handle ].

- Pull seat height adjustment handle - 1 - away from seat a little.

- Guide assisting tool - 2 - into mount - 4 -.

- Pull assisting tool - 2 - in - direction of arrow A - to push spring - 3 - back.

- Pull seat height adjustment handle - 1 - in - direction of arrow B -.

• Installing

To install, perform the steps used in removal in reverse order. When doing so, note the following:

- Ensure retaining clamp is positioned on seat height adjustment handle lever. Note installation position => [ Retaining clamp installation position ].

2 Assisting Tool

3 Spring

4 Mount

Preparing assist tool to remove seat height adjusting handle





- Bend a screwdriver - 1 - with a width - 2 - of 3.5 mm and dimensions - A - 20 mm and - B - max. 15 mm.

Retaining clamp installation position





- Ensure springs - 2 - (Qty. 2) in retaining clamp - 3 - are positioned on outside of lever - 1 -.