Halogen Headlamps Assembly Overview

Halogen Headlamps

CAUTION!
Before beginning repairs on the electrical system:

• Obtain the anti-theft radio security code.

• Switch the ignition off.

• Disconnect the battery Ground (GND) strap.

• After reconnecting vehicle battery, re-code and check operation of anti-theft radio. Also check operation of clock and power windows according to Repair Information and/or Owner's Manual.

• Steps after reconnecting voltage supply => Battery.

=> [ Halogen Headlamps Assembly Overview ]

=> [ Halogen Headlamps, Adjusting ]

Halogen Headlamps Assembly Overview

• Headlamps must be readjusted after performing measures which could affect their setting.





1 Headlamp housing

2 Impact screw

• For adjusting headlamp housing to body contour

• Must make contact at lock carrier

3 Light bulb for turn signal/parking lamp

• 12 V, 27/7 W

• Orange

• Replacing bulb => [ Turn Signal/Parking Lamp, Replacing Bulb ] Halogen Headlamps

4 Light bulb socket

5 Housing cover

6 Bulb for low beam

• H1 - 12 V, 55 W

• Replacing => [ Low Beam Headlamp, Replacing Bulb ] Halogen Headlamps

7 Bulb for high beam

• H9 - 12 V, 65 W

• Replacing => [ High Beam Headlamp, Replacing Bulb ] Halogen Headlamps

8 6 Nm

9 Gap cover

Halogen Headlamps, Adjusting

Current specifications and procedures for headlamp adjustment:

=>

Adjustment screws on right headlamp.





Arrangement on left headlamp is mirror image of right headlamp.

1. Adjustment screw for height-/lateral adjustment

2. Adjustment screw for vertical adjustment

- For height adjustment, turn adjustment screws - 1 - and - 2 - with the same number of rotations.

- Only use adjustment screw - 1 - for lateral adjustment.