Windshield Wiper/Washer Switch

Windshield Wiper/Washer Switch

Removing





- Remove Steering Column Switch Module (SCSM). Refer to => [ Steering Column Switch Module ] Steering Column Switch Module.

• Steering must be in center position (wheels in straight ahead position) when removing and installing coil connector with slip ring.

- Carefully release catches - arrows -.

- Pull return spring with slip ring - 2 - with Steering Angle Sensor (G85) - item 1 - off from steering column switch module (SCSM).

- Remove bolts - 1 - and - 2 -.





- Remove Windshield Wiper/Washer Switch (E22) - item 3 - from steering column switch module - arrow -.

Installing

Install in reverse order of removal, observing the following:

- Make sure all fasteners and electrical connectors are properly engaged.
- Install Steering Column Switch Module (SCSM).

Tightening Specifications