A-Pillar and Roof Frame Trim

A-Pillar and Roof Frame Trim







1 Right A-pillar trim

• Remove A-pillar trim.

• Remove door seal in A-pillar area.

• Remove nuts => [ (Item 7) Nut ].

• Bore out side hollow rivet heads (Qty. 3), drive rivet shafts out and remove trim.

2 Roof frame trim

• Remove roof frame trim.

• Before removal, removing left and right A-pillar trim.

• To remove, remove nuts => [ (Item 3) Nut ] and trim.

3 Nut

• 6.5 Nm

4 Pop rivet

5 Retaining clamp

6 Left A-pillar trim

• Removal is same as right trim.

7 Nut

• 6.5 Nm

8 Retaining clamp

• Movable

9 Retaining clamp

• Fixed

10 Retaining clamp

• Movable

11 Pop rivet

A-pillar trim, removing





- Remove door seal in A-pillar area and remove A-pillar trim.

- Remove nut - 6 -.

- Drill rivet heads off hollow rivets - 2 - and - 7 - and knock rivet shafts through.

- Remove trim - 1 -.

- Upper and lower retaining clips - 3 - must move to balance out tolerances.

- Retaining clip - 5 - is fixed. It is secured to A-pillar with hollow rivets.

4 Pop rivet