Sunroof / Moonroof: Testing and Inspection

Sunroof Motor Neutral Position, Link Guide, Checking and Adjusting

Checking

Zero position can only be checked when sunroof panel is installed.

- Trims removed

- Slide sunroof back and into closed position.

- On vehicles with glass panel, slide sliding headliner completely toward rear.

- In vehicles with solar panel, drive back sunroof panel.

- Pull sunroof headliner slightly toward rear in - direction of arrow - and slide in headliner toward rear.





- Close sunroof.

- For a correct "zero" position, guide pins - 1 - in center on tilting mechanism must align with marking - arrow - on link guide - 2 -.





- In vehicles with solar panel, slide headliner with panel closed from rear toward front until it engages.

- When doing this, coupling plate - 2 - must be slid into guide - 1 - on sunroof headliner at rear.





- When sunroof is tilted open, headliner is also tilted open.