Seat Angle Adjustment Motor

Seat Angle Adjustment Motor





1 - Connector

2 - Motor For Seat Inclination Adjustment

• Removing

- Remove seat. Refer to => [ Seat ] Seat.

- Mount the fixture for seat repair (VAS 6136) on the engine and transmission holder (VAS 6095).

- Attach the front seat to the fixture for seat repair (VAS 6136).

- Remove control module. Refer to => [ Control Module ] Control Module.

- Remove connector - 1 -.

- Remove bolts - 3 - (Qty. 2).

- Remove motor for seat tilt adjustment - 2 -.

• Installing

- To install, perform the steps used in removal in reverse order.

3 - Screws, (Qty. 2)

• Tightening specification 10 Nm

4 - Longitudinal Seat Adjustment Motor

5 - Backrest Adjustment Motor