Front Turn Signal Lamp, Replacing Bulb

Front Turn Signal Lamp, Replacing Bulb

Removing

CAUTION!
• Switch off all electrical consumers.

• Switch ignition off and remove ignition key.

Left headlamp

- Remove washer fluid reservoir => [ Washer Fluid Reservoir, Audi A4/S4 ] Washer Fluid Reservoir, Audi A4/S4.

Right headlamp

- Lift vehicle.

- Remove right front wheel.

- Remove screws - arrows -.





- Remove forward portion of wheel housing liner.

All models:





- Turn bulb holder - 3 - counter-clockwise - arrow - and pull from housing.

- Screw bulb out of holder.

Installing

Install in reverse order of removal, noting the following:

CAUTION!
• Do not touch glass portion of bulb with bare hands. Even the smallest amount of moisture and/or contaminants from fingers that evaporates on the bulb during operation can cause the glass to cloud over.

• When installing housing cover, ensure proper seating. Water intrusion will damage headlamp.

- Fit new bulb in housing.

- Markings - 1 - and - 2 - must be opposite each other when inserting bulb holder into housing.

Left headlamp

- Install washer fluid reservoir => [ Washer Fluid Reservoir, Audi A4/S4 ] Washer Fluid Reservoir, Audi A4/S4.

Right headlamp

- Install wheel housing liner.