Diagram 106/4 (Tracks 29-42)

IMPORTANT NOTE:
This manufacturer uses "Track" style wiring diagrams.
For information on how to use these diagrams effectively, please refer to Diagram Information and Instructions. Diagram Information and Instructions


Power Supply Relay (terminal 30, B+), Automatic Transmission After-Run Fuse





ws = white
sw = black
ro = red
br = brown
gn = green
bl = blue
gr = grey
li = lilac
ge = yellow
or = orange
rs = pink

J217 - Transmission Control Module (TCM) Common Modules Overview

J271 - Motronic Engine Control Module (ECM) Power Supply Relay Locations

J317 - Power Supply Relay (terminal 30, B+) Locations

S286 - Automatic Transmission After-Run Fuse Locations

(12) - Ground Connection (in engine compartment, left) Ground Locations

(83) - Ground Connection 1 (in right front wiring harness)

(D101) - Connection 1 (in engine compartment wiring harness)

* - for engine codes ALT only

** - for engine codes BPW, BRC only

*** - for engine codes AUK, BKH, BWE, BWT, BPG only

**** - for engine codes BFB only

# - 6.0 mm2 cross-section where applicable

Previous Diagram 106/3 (Tracks 15-28)

Next Diagram 106/5 (Tracks 43-56)