Diagram 83/8 (Tracks 85-98)

IMPORTANT NOTE:
This manufacturer uses "Track" style wiring diagrams.
For information on how to use these diagrams effectively, please refer to Diagram Information and Instructions. Diagram Information and Instructions


Engine Speed (RPM) Sensor, Knock Sensor (KS) 1, Knock Sensor (KS) 2, Engine Coolant Temperature (ECT) Sensor





ws = white
sw = black
ro = red
br = brown
gn = green
bl = blue
gr = grey
li = lilac
ge = yellow
or = orange
rs = pink

G28 - Engine Speed (RPM) Sensor Locations

G61 - Knock Sensor (KS) 1 Locations

G62 - Engine Coolant Temperature (ECT) Sensor Locations

G66 - Knock Sensor (KS) 2 Locations

J623 - Engine Control Module (ECM) Locations

T3 - 3-Pin Connector, grey, on engine block

T3a - 3-Pin Connector, green, on engine block

T60 - 60-Pin Connector, black

(323) - Knock Sensor Ground Connection (in fuel injection wiring harness)

(327) - Sensor Ground Connection (in engine compartment wiring harness)

Previous Diagram 83/7 (Tracks 71-84)

Next Diagram 83/9 (Tracks 99-112)