Part I Oil Pan, Balance Shaft Module, Component Overview

Part I oil pan, balance shaft module, component overview





1 - 15 Nm

2 - Oil dipstick
^ Oil level must not be above max. mark!

3 - Inlet spout

4 - Guide tube

5 - Intermediate plate

6 - Balance shaft module with oil pump
^ With pressure relief valve 12 bar

7 - 15 Nm plus an additional 1/4 turn (90 °)
^ Replace
^ Note different length of bolts

8 - 15 Nm

9 - Oil pan
^ Clean sealing surface before installing

10 - 15 Nm

11 - Seal

12 - Oil drain plug, 30 Nm
^ With permanent sealing ring
^ Replace

13 - Chain sprocket

14 - 10 Nm

15 - Protective cap

16 - Oil Level Thermal Sensor G266

17 - Seal
^ Replace
^ Oil before assembling

18 - 20 Nm plus an additional 90 °
^ Replace

19 - Chain guard

20 - Chain

21 - Sealing flange
^ Must be located on dowel sleeves