Power Trunk / Liftgate Lock Actuator: Service and Repair

Rear Lid Lock Actuator, Avant

Removing

- Remove lower rear lid trim.

- Disengage operating rod - 3 - at rear lid lock, for this purpose turn hinge arm - 4 - clockwise and remove operating rod.





- Disengage operating rod at actuator - 1 -, for this purpose slide operating rod to actuator and turn approx. 90° out of mount - arrow -.

- Loosen bolts - 2 - approx. 2 rotations and disengage actuator at rear lid.

- Disconnect electrical harness connector.

- Remove bolts - 3 -.





- Tightening torque 2 Nm

- Remove adapter plate - 2 - from actuator - 1 -.

Installing

Installation is performed in the reverse order of removal.